Integration Form Process

WELCOME TO APSİYON IoT

As the Apsiyon IoT Team, we ensure that your project's data is transferred correctly to the Apsiyon system, and we regularly monitor the consumption values on your meters. We support you in carrying out your billing processes in compliance with the Heat Regulation (Isı Yönetmeliği).

You can create a support request by sending us an email at iot@apsiyon.com, or in urgent cases, you can reach us by calling 0 (216) 911 87 77 and pressing 3 and then 4.

After the Additional Service Agreement for meter readings is registered in the system, the IoT team will email you the Meter Integration Form file in Excel format.

With the Meter Integration Form, we transfer all of your project's meter data to the system completely.

Meter Type Sheets

You can select your project's meter types from the sheets at the bottom of the Meter Integration Form and enter your data in the relevant sheet.

Heating, Hot Water, Cold Water, Cooling Sheets

The data for the meters in your project for which distributions will be made must be entered in the relevant meter type sheet.

First of all, the block-unit information in the meter type sheets is your project's data in the Apsiyon system. Please do not make any changes to this data. You are also not expected to fill in the other blue fields in the file.

You are expected to fill in the red fields.

Main Meter: If your site has more than one block or receives more than one invoice, please specify this in the relevant field.

Meter Brand: You can optionally enter the meter brand.

Meter Model: You can optionally enter the meter model.

Meter Production Year: If you know it, you can optionally enter the production year of the relevant meter.

Indoor Usable Area (Net m²): If you have not entered the net square meter information for the units in the Community > Units menu in Apsiyon, please provide it in the form.

Meter No: Next to each unit number, enter the installation number of that unit's meter.

Last Reading Date: Enter the date of the last reading made by the previous reading company or, if you read the meters yourself, the date of the last reading.

Last Reading Value: Enter the last reading value recorded by the previous reading company or, if you read the meters yourself, the last reading value.

In the sample image, you can see how the relevant fields are filled in for one meter from each of the two blocks.

Common Areas Sheet

If your project has common areas included in your invoices (Heating, Hot Water, Cold Water, or Cooling), enter the relevant meter data in the Common Areas sheet.

In the Common Areas sheet as well, you are expected to fill in the red fields.

The Expense Account to be used in the system for your common area meters must have been created in the Definitions > Expense Definitions section in Apsiyon.

In the sample image, you can see the heating and Hot Water common area meters filled in.

Project Details Sheet

This is the sheet you need to fill in to send us your project's information and details.

In the Project Details sheet as well, you are expected to fill in the red fields.

15 Degree Penalty Field: Under the Heat Regulation, if there is consumption below 15 degrees, is there a penalty you would like applied? If so, this field is for sharing a copy of the relevant decision with us.

Meter Types to Be Distributed Field: This is the field where you select the meter types for which distributions will be made in your project.

Installation Type Field: This is the field where you share information about the installation types in your project with us.

In addition, the field shown in the image below is where you share the estimated day on which the invoices to be distributed for your project reach you from the distribution companies.

0 (216) 911 87 77

For all our solutions, you can scan the QR code in the image or, if you prefer, use the link here.

Was this article helpful?