Heating and Hot Water Distribution
In central systems, the distribution of the main meter invoice received by the project is carried out in accordance with the Heating Regulation.
In projects where heating distribution is performed, the distribution calculation formulas are found in Section 8 of Article 3.
*A sample distribution calculation is as follows:
Natural gas invoice amount received by the project: 1000 TL
70% of the 1000 TL amount is divided by the total consumption to find the amount spent per 1 kwh.
1000 TL x 0.7 = 700 TL
700 TL / (total consumption) = "x" TL (70% consumption unit price)
30% of the 1000 TL invoice is divided by the total m2 to find the heat loss amount per 1 m2.
1000 TL x 0.3 = 300 TL
300 TL/ (total m2) = "y" TL (30% heat loss unit price)
By multiplying the unit prices calculated above by the units' consumption and m2 values, the total heating usage is calculated.
Let's do a sample calculation for a specific unit:
Meter consumption (Last reading - first reading): 250 kwh
Unit net m2: 100 m2
Calculation Detail
Consumption: 250 kwh
250 kwh * "x" TL = ...... TL (70% consumption)
100 m2 * "y" TL = ....... TL (30% heat loss)
"x TL" + "y TL" = The amount from the natural gas invoice that should be reflected to the unit.
In projects where heating and hot water distribution is performed, the distribution calculation method is found in Section 8 of Article 3 of the regulation.
A sample distribution calculation method is as follows:
The natural gas unit price is found by dividing the total amount of the natural gas invoice by the ‘’Volume Measured by Meter’’ value, also shown on the invoice.
Then, the natural gas unit price spent for the cost of heating 1 m3 of hot water is found according to the formula below.
Hot Water Heating Unit Price = (( 1.2 x 1000 x ( Boiler Outlet Hot Water Temperature – 10 ) x Natural Gas Unit Price / 8250)
Natural Gas Invoice Amount: 1000 TL
Volume Measured by Meter: 500 m3
1000 TL / 500 m3 = 2 TL (natural gas unit price)
1.2 x 1000 x (50-10) x 2 / 8250 = 11.636 TL (unit price for heating 1 m3 of hot water) ("z" TL)
Total hot water usage: 40 m3
40 m3 x 11.636 TL = 465.454 TL (amount spent from the natural gas invoice to heat hot water)
1000 TL (total invoice) – 465.454 TL (hot water heating cost) = 534.545 TL (heating amount)
534.545 TL x 0.7 = 374.182 TL (70% amount)
374.182 TL / (total consumption) = x TL (70% unit price)
534.545 x 0.3 = 160.363 TL (30% amount)
160.363 TL / (total m2) = y TL (30% unit price)
Let's do a sample calculation for a specific unit:
Meter consumption (Last Reading - first reading): 250 kwh
Hot Water Consumption (Last Reading - First Reading): 5 m3
Unit net m2: 100 m2
Calculation Detail
250 kwh * "x" TL = ...... TL (70% consumption)
100 m2 * "y" TL = ....... TL (30% heat loss)
5 m3 * "z" TL = ..... TL (Hot Water Heating Cost)
"x TL" + "y TL" + "z TL" = The amount from the natural gas invoice that should be reflected to the unit.
All of these calculations are provided to you on page 2 of the Individual Expense Sharing Documents.
Was this article helpful?